Does Q2001-SNV-SPPE have a shut-off or non-shut-off design?

This model has a shut-off design. Shut-off versions close the fluidic path when disconnected, while non-shut-off versions leave the path open.

Q20female endStraightshut-offQuick-Connect Fittingwhethersupports bulkhead mounting?

This model uses a non-bulkhead design and is generally used for direct in-line connections.

Is PP compatible with the target fluid?

Confirm compatibility based on the conveyed fluid, operating temperature, pressure, cleaning requirements, and seal material. If compatibility is uncertain, submit the operating conditions for engineering review.

Q2001-SNV-SPPEwhether 2D drawing?

Add the current model to your list and request a drawing; our engineers will verify the product code and document revision before providing it.

Q2001-SNV-SPPE

Q2001-SNV-SPPE is a Q20female endStraightshut-offQuick-Connect Fitting for tubing with an ID of 1.6 mm. It uses a PP housing and EPDM seals. It uses a non-bulkhead structure. It is suitable for quick-disconnect fluidic connections in equipment. The fluidic path can be shut off when the fitting is disconnected.

Typical Applications:

IVD internal equipment fluidic paths, analytical-instrument fluidic modules, equipment internal tubing connection, connection

Model:Q2001-SNV-SPPE.

Model	Q2001-SNV-SPPE
Product Code	839067
Product Category	Quick-Connect Fitting
Product Series	Q20
Tubing ID	1.6 mm
Male/Female End	Female End
Mounting Method	Non-Bulkhead
Valve Configuration	Valved
Shape	Straight
Housing Material	PP
Seal Material	EPDM

2D Drawing Not Available Yet

To request a 2D drawing for this product, please click “Add Drawing” above.

Datasheet not yet available

The datasheet for this product has not been uploaded yet.

Frequently Asked Questions

compatible with 1.6 mm tubing ID. requires confirm female end, and equipment mounting method.

Fittings for volume orders and custom applications

Foreach can support fitting selection, volume supply, and customization based on port type, tube size, material, sealing element, mounting structure, and application conditions.