Does Q2004-PNX-SACN have a shut-off or non-shut-off design?

This model has a non-shut-off design. Shut-off versions close the fluidic path when disconnected, while non-shut-off versions leave the path open.

Q20male endStraightnon-shut-offQuick-Connect Fittingwhethersupports bulkhead mounting?

This model uses a non-bulkhead design and is generally used for direct in-line connections.

Is POM compatible with the target fluid?

Confirm compatibility based on the conveyed fluid, operating temperature, pressure, cleaning requirements, and seal material. If compatibility is uncertain, submit the operating conditions for engineering review.

Q2004-PNX-SACNwhether 2D drawing?

Add the current model to your list and request a drawing; our engineers will verify the product code and document revision before providing it.

Q2004-PNX-SACN

Q2004-PNX-SACN is a Q20male endStraightnon-shut-offQuick-Connect Fitting for tubing with an ID of 6.4 mm. It uses a POM housing and NBR seals. It uses a non-bulkhead structure. It is suitable for quick-disconnect fluidic connections in equipment.

Typical Applications:

IVD internal equipment fluidic paths, analytical-instrument fluidic modules, equipment internal tubing connection, Tubing

Model:Q2004-PNX-SACN.

Model	Q2004-PNX-SACN
Product Code	839015
Product Category	Quick-Connect Fitting
Product Series	Q20
Tubing ID	6.4 mm
Male/Female End	Male End
Mounting Method	Non-Bulkhead
Valve Configuration	Non-Valved
Shape	Straight
Housing Material	POM
Seal Material	NBR

2D Drawing Not Available Yet

To request a 2D drawing for this product, please click “Add Drawing” above.

Datasheet not yet available

The datasheet for this product has not been uploaded yet.

Frequently Asked Questions

It accepts tubing with an ID of 6.4 mm. Selection should also confirm the gender, valve configuration, and equipment mounting method.

Fittings for volume orders and custom applications

Foreach can support fitting selection, volume supply, and customization based on port type, tube size, material, sealing element, mounting structure, and application conditions.