Air Bubble Detection in Transparent Tubing
See how an air bubble detection module monitors transparent tubing. Review tubing compatibility, detection response and output settings for instrument fluid paths.
Watch the air bubble detection module overview
What affects air bubble detection in an instrument fluid line?
Air bubble detection must be matched to the tubing and liquid passing through the sensing location. This ABD overview introduces the tubing interface and configuration software. Evaluate the actual bubble conditions and controller response before relying on the signal for a fluid-path alarm.
00:16 — Tubing compatibility
The on-screen text introduces use with transparent and semi-transparent tubing. Confirm the tubing material, outer diameter and liquid combination for the chosen ABD configuration.00:26 — Detection response
The video introduces response performance. Sensor response time alone does not establish the smallest detectable bubble or the complete instrument's reaction time; confirm those requirements with the actual tube, liquid, flow and controller.00:37 — Software parameters and output status
The software screen shows parameters, signal information and output-state settings, illustrating how the module can be configured for integration.
Review air bubble detection and complementary pressure monitoring
Use the ABD product page for compatible tubing, detection interfaces and installation details. The PDM5 pressure sensor shown alongside it supports a different monitoring task; pressure measurement does not replace air bubble detection. Describe the liquid, tubing and expected bubble conditions when reviewing the application.