What do these products do in this instrument?
Multiport rotary valves: sample, reagent, wash-liquid and bypass selection
Select the current source or maintenance destination inside the analyzer cabinet, coordinating metering and reaction timing. Provide a defined outlet for displaced liquid to prevent old sample or wash liquid entering measurement.
MRV3 selects sources or destinations and requires a port-state diagram and shared-volume budget. Port count indicates routing options; confirm pressure in each state and independent simultaneous supply requirements separately.
Define connections using the instrument's port-state diagram
This page covers multiport rotary valves. Mark every port, current source, receiving destination and branch requiring isolation, and check connections during aspiration, delivery, cleaning, maintenance and power loss. Valve selection must correspond to conditions permitting the drive action.
Include renewal of shared segments after switching in the sequence
After source switching, shared tubing may retain the previous composition. Record volume and arrival delay from the new source to the receiver, and measure residue and recovery for the actual worst-case switching combination. Confirm port positioning and arrival of new liquid separately.
Translate actual branch conditions into configuration requirements
| Condition | To confirm |
|---|---|
| Connections and pressure | Provide port diagrams and pressure conditions for all operating, cleaning and shutdown states. |
| Shared volume | Identify residue locations after source changes, flushing volumes and discharge destinations. |
| Control and isolation | Check valve-position feedback, pump actions, shutoff leakage and permitted power-off states. |
Compare product configurations by the roles on this page
| Product | Configuration option | Conditions to verify |
|---|---|---|
| MRV3 multiport rotary valve | Multiple-source selection | Compare 10-, 16- and 24-port options and port diagrams; verify high-pressure suitability separately |
Confirm product roles in actual operation
Assess dose, reaction, blanks and recovery according to the method, and verify what is measured after filtration.
Do more valve ports mean more channels can supply liquid simultaneously?
Check port connection structure and drive configuration. The number of selectable sources, independent paths and simultaneous-operation capability are different conditions, determined by actual connections in each state.
Validate field representativeness and internal metering separately. Filtration intended to protect components must still meet method requirements.